LOCAL KNOWLEDGE AND PROVEN EXPERIENCE
Pool Heating Solutions in Adelaide: Solar, Heat Pumps & DIY Since 1979
Beasley Pool Heating supplies, installs and services three proven pool heating systems for South Australian pools: solar pool heating (authorised Zane dealer), pool heat pumps (authorised Guardian dealer), and DIY solar kits shipped Australia-wide. Family-owned in Adelaide since 1979, we've completed over 20,000 installations across SA, residential and commercial.
Free onsite consultations across metro Adelaide. Single-day installs for most metro pools. 48 to 72 hour service response from our Beverley warehouse.
YOU KNOW THE PROBLEM, SO WHAT IS THE SOLUTION?
Who Pool Heating is for, and What it Actually Solves
If you own a pool in Adelaide, you've probably had the same realisation: the swimming season is short. December through February if you're lucky, and even then the water's only comfortable for part of the day. Pool heating exists to fix that. It extends the season, sometimes to year-round, depending on the system you choose.
Owners outside metro Adelaide
If you're handy and located outside our standard install area, our DIY kits give you the same Zane product at a lower total cost.
Homeowners who want more swim time
The most common reason customers contact us. You've invested in a pool but only get to use it 3 months a year. Solar typically adds 7 to 8 months; a heat pump 7 to 8 months, or if sized correctly can take you to year-round.
Commercial pool operators
Hotels, schools, aquatic centres, retirement villages, holiday parks. These are facilities where the pool is part of the offering and needs to operate at temperature reliably.
Families with kids who swim daily
Heating makes the difference between a pool that gets used a few times a season and one that gets used every day. The cost is offset many times over by actual use.
Pool owners with old or failed systems
Inherited a non-working system? Got a 20-year-old solar setup that's seen better days? Most existing pools can be retrofitted with a new system.
Three Proven Systems
What Each One Is and What It Includes
We sell three systems, so we're free to recommend whichever genuinely suits your pool, including telling you the one you came in asking about isn't the right fit. Here's what each one is and what it includes.
Solar Pool Heating
The most popular and lowest-running-cost option for Adelaide pools with plenty of roof space. A complete system includes: • Zane TPR (Thermo plastic rubber) collectors sized to your pool • Zane PC5 controller and sensors to monitor roof and pool temperatures • Connection to your existing pool pump (or a booster pump on larger systems) • Full installation by Beasley's own team, typically single-day • 25-year design life on Zane TPR collectors
Pool Heat Pumps
For pools without suitable roof space, or owners who want the option to swim year-round. A complete heat pump install includes: • Guardian inverter heat pump sized to your pool volume and target temperature • Plumbing connection to your existing pool circulation • Electrical connection (we coordinate licensed electrical work where required) • Programmable controller with set-and-forget temperature management • Choice of Eco Pro range (everyday workhorse) or Lux V range (premium, ultra-quiet) • Up to 15 years typical service life
DIY Solar Kits
Same Zane product we install professionally, supplied as a complete kit you install yourself. Each DIY kit includes: • 50m Absorber Roll(s) of Zane • Gulfstream collectors in your chosen size (18, 22, 28, 33 or 40sqm) • All fittings, connectors and mounting hardware • Bypass valves and frost-protection components • Full step-by-step installation instructions Phone and email support from our team during your install Australia-wide shipping
DISCOVER JUST HOW EASY IT IS WITH BEASLEY POOL HEATING
Our Step-By-Step Process
Initial enquiry (2 minutes) via online form or phone call. Tell us your pool size, location and roof type. We'll respond within one business day.
Free onsite consultation across metro Adelaide. We measure your pool, inspect the roof aspect and condition, check electrical capacity if a heat pump's on the table, and walk you through the recommendation in person.
Detailed written quote, fixed-price, itemised, no hidden costs. We'll often quote multiple options if it makes sense, for example solar-only versus solar plus heat pump. The quote stands while you decide.
Single-day install for most metro residential systems. Half-day for most heat pumps. Commercial and large residential jobs scoped individually. We schedule around your availability.
Ongoing support and 48 to 72 hour service response from our Beverley warehouse. Spare parts in stock. Warranty handled in-house. We service every system we install.
NO SMOKE AND MIRRORS
What Does Pool Heating Cost in Adelaide?
Honest answer: it depends on the system, your pool size, and your installation specifics. We can't always quote you accurately over the phone, but here's the approximate shape of the investment so you know what to expect before booking the onsite quote.
Solar pool heating cost and installation price is driven primarily by the size of the collector area (roughly equal to your pool's surface area) plus the Zane PC5 solar controller, plumbing, pump, labour, and any roof access work. Standard residential installs fall within a predictable range; commercial and oversized installs are scoped individually.
Pool heat pumps Cost and installation price is driven by the size of the unit which is measured in kilowatts. The larger the unit, the more heat it can transfer into the circulating pool water. Heat pumps are sized on pool volume and target temperature. Most standard family pools (40 to 60kL) suit a 13 to 17kW inverter unit. Installation requires plumbing of the unit into the filtration system and hardwiring the unit with a licensed electrician. (All done in-house)
DIY kits Fixed pricing per size (18, 22, 28, 33, 40sqm). Substantially cheaper than an installed system because you provide the labour. Shipping included Australia-wide. The lowest total cost option if you're hands-on and your pool suits solar.
POOL HEATING SOLUTIONS
Frequently Asked Questions
For lowest running cost, solar pool heating is most efficient. Once installed, you only pay to run the circulation pump. For year-round heating, a modern inverter heat pump is most efficient, producing 4 to 6 units of heat per unit of electricity drawn.
Most metro Adelaide solar pool heating installations are completed in a single day. Heat pump installations typically take half a day, depending on whether new electrical or plumbing work is required. Commercial and large residential jobs are scoped individually.
Yes, and it's a popular choice for customers who want the lowest possible running cost in summer plus the ability to swim through winter. Solar handles most of the heating load on your warm days; the heat pump tops up on cool days and runs through winter if you want to swim then.
Not usually. We measure and inspect during the quote visit, so by installation day everything is planned. For new pools under construction, we coordinate timing with your pool builder.
We service every system we install. Our Beverley warehouse stocks Zane and Guardian spares, so most repairs are completed within 48 to 72 hours of you calling. Out-of-warranty repairs are charged at standard service rates with quotes provided upfront.
Yes. Zane solar systems carry the manufacturer's warranty (with design life often exceeding 20 years in practice). Guardian heat pumps carry their full manufacturer warranty. Our installation workmanship is backed by Beasley directly.
We undertake larger residential and commercial installations across regional South Australia (Barossa, Fleurieu, Yorke Peninsula, Limestone Coast, Riverland). For smaller jobs outside our standard install area, our DIY kits ship Australia-wide.
Choosing A Pool Heating Company In Adelaide?
Here's What We'd Want You to Know...
Pool heating is a 15 to 25 year decision. Long after the cheapest installer has moved on, you'll still need parts, service and someone who'll take your call. Here's how we compare to the two most common alternatives in the Adelaide market.
Check OUT OUR RECENT WORK
Recent Installs Across South Australia
Three recent examples of the kind of work we do across SA: different pool sizes, different systems, different parts of the state. Full case study and gallery content available on request, or browse the wider portfolio in our gallery.
Residential Heat Pump
Private Residence - Unley
Air Deflector Upgrade
Private Residence - Adelaide Metro
Commercial Replacement
Hahndorf Lodge - Adelaide Hills
ACROSS THE RANGE
Adelaide Owners on the System They Chose
Solar, heat pump, gas or a combination of them. Here is what Adelaide owners say about the option they went with.
Keep Up the Great Work Guys
"Five stars for Henry and his team. They were great right from the process of provide quote (best price), site visit, equipment installation (modified their standard process to suit my property’s requirements at no extra cost) and, more importantly providing prompt after sales-service.
Everyone was punctual, respectful in behaviour and super helpful with general maintenance tips and advice. Keep up the great work guys."
Deesin10
Google Review
Prompt & Professional Approach
"All the guys from Beasley Solar were fantastic I had them do a full system for me back in 2003 and my controller packed up.
Called, spoke to Henry at the store and the very next day the guys arrived and replaced controller now all perfect again. Thank you guys for your prompt and professional approach.
Highly recommend them to anyone."
Mike Whellans
Google Review
Worked Without Fault
"Was doing an extension on my property at Unley and was in need of prompt service when building my pool and solar heating. John and his team were contacted, attend onsite and quoted and installed seamlessly and the system has worked without fault.
I have never had a problem in years and would highly recommend the business for anyone looking at solar or pool equipment in general as a first step."
Krystal Martinovic
Google Review
Quality Was Amazing
"These guys just installed a solar heating system at my home in Walkley Heights. The service was great, the installation quality was amazing and the system works like a charm.
If your going to get solar heating use this great south Australian business, we looked at most companies and DIY kits this
system is much much better then we could of thought.
Thanks again."
Mal Jones
Google Review
KEEP EXPLORING
Not Quite the Page You Needed? Here's Where to Head Next...
Whether you're heating a backyard pool, running a commercial facility, weighing solar against a heat pump, or need an existing system looked at, there's a page for exactly that.
Family pools, lap pools, plunge pools, new builds and retrofits, sized and installed for Adelaide backyards.
A side-by-side look at running costs, install costs and what genuinely suits your roof and Adelaide conditions.
Hotels, schools, aquatic centres and holiday parks that need reliable temperature and low running costs at scale.
WHERE WE WORK
Pool Heating Across Adelaide & South Australia
We install pool heating across the greater Adelaide metropolitan area, including the western suburbs (Henley Beach, Grange, West Lakes, Seaton), the eastern suburbs (Norwood, Burnside, Magill, Stonyfell), the southern suburbs (Brighton, Marion, Aldinga, Seaford), the northern suburbs (Mawson Lakes, Salisbury, Gawler, Munno Para), and the Adelaide Hills.
We also undertake commercial and larger residential installations regionally across South Australia, including the Barossa Valley, Fleurieu Peninsula, Yorke Peninsula, Limestone Coast and Riverland.
DIY kit orders can be shipped Australia-wide.
Pool Heating in Northern Adelaide
From Salisbury to Gawler, solar specialists for the growing north
From the established suburbs around Salisbury and Para Hills out to the fast-growing family estates of Gawler, Munno Para and Angle Vale, Beasley Pool Heating installs solar pool heating, heat pumps and DIY kits right across Adelaide's north.
The newer homes and larger blocks up this way are well suited to roof-mounted solar, and our team installs and services it all the way to the northern fringe.
Suburbs we cover include: Mawson Lakes, Salisbury, Salisbury East, Salisbury Heights, Para Hills, Pooraka, Ingle Farm, Walkley Heights, Gepps Cross, Elizabeth, Craigmore, Blakeview, Smithfield, Andrews Farm, Munno Para, Gawler, Angle Vale, Virginia and Two Wells.
Good to know: most metro installs in the north are completed in a single day, with service and spare parts run out of our Beverley warehouse.
Book A Free Onsite Quote, and we'll arrive within 48 Hours
Get your free, no obligation, fixed-price quote. Most metro Adelaide consultations are booked within two business days. Honest advice, including telling you when one system clearly suits your situation better than another.
EXPLORE THE BLOG
From Our Advice Hub
Practical guides on pool heating, sizing and running costs, written by the team that installs them.
