THE PERFECT POOL HEATING SOLUTION
Pool Heat Pumps in Adelaide, Authorised Guardian Dealer
A pool heat pump extracts heat from ambient air and transfers it into your pool. It's the same technology as a reverse-cycle air conditioner, applied to pool water. The result is reliable heating in any weather, including through Adelaide's winter, from a compact unit beside your equipment pad.
Beasley Pool Heating is South Australia's authorised Guardian dealer, supplying their full inverter range from the everyday Eco Pro through to the premium Lux V, all installed and serviced by our own team since 1979.
★★★★★ 4.7 on Google · 20,000+ pools heated · Authorised Zane & Guardian dealer · 45+ years in Adelaide
IS A POOL HEAT PUMP RIGHT FOR YOU?
When A Pool Heat Pump Makes Sense
Heat pumps aren't always the obvious first choice for an Adelaide pool. Solar is cheaper to run, and plenty of pools suit solar. But heat pumps are the right answer in a few specific situations.
A pool heat pump is the right choice if you:
Don't have suitable roof for solar
Not enough roof space, fully shaded, or structural concerns (eg polycarbonate roofing or soft terracotta tiles). A heat pump sits at ground level and needs no roof.
Have rooftop solar PV already
If you have electricity-generating solar PV on your roof, running a heat pump during daylight hours is essentially free, using excess generation that would otherwise export to the grid for minimal feed-in.
Want to swim year-round
Solar can't carry an Adelaide pool through June to August. An appropriately sized heat pump can, even when ambient air temperatures are down to around 5°C.
Want precise temperature control
Heat pumps let you set and forget a target temperature. Solar adds heat when there's sun; heat pumps maintain temperature regardless.
YOUR NEW SYSTEM IS HERE
What A Complete Beasley Heat Pump Installation Includes
A pool heat pump isn't just the unit. It's a unit correctly sized to your pool, wired into your home's electricity, and plumbed into your existing pool filtration system. Here's what's in every installation.
Guardian inverter heat pump
%20Large.jpeg)
Plumbing integration
Electrical connection
Programmable controller
Site preparation
Commissioning and walkthrough
HOW IT WORKS IN 5 EASY STEPS
Our Heat Pump Installation Process
A heat pump installation is typically simpler than solar (no roof work) but it still needs careful sizing and electrical coordination. Here's how it runs...
Enquiry and initial assessment:
Online form or phone call. Pool size, location, electrical setup if known. About two minutes.
Free onsite consultation:
We come to you. Given our experience, we can build the majority of quotes with aerial photography and a few photos of your pool equipment, electrical switchboard and proposed site sent via email. Depending on the complexity of your install, and if it is required, a site visit will be scheduled. Discuss your goals.
Detailed written quote:
Fixed-price, itemised. Includes heat pump, plumbing, electrical work and cost of total investment.
Installation:
Typically half a day for metro residential clients, our team handles plumbing and unit installation; our licensed electrician handles electrical work and unit connection. All coordinated as a single visit.
Commissioning and handover:
We start the unit, confirm output, set the controller to your target temperature, and walk you through how to schedule and adjust.
THE COST DRIVERS
What Does A Pool Heat Pump Cost in Adelaide?
Heat pump pricing has more variables than solar: unit size, electrical requirements and plumbing complexity. Here's what drives the cost...
%20Large.jpeg)
Heat output capacity (kW)
%20Large.jpeg)
Unit range
%20Large.jpeg)
Electrical work
%20Large.jpeg)
Plumbing complexity
%20Large.jpeg)
Running costs
GOT A QUESTION ABOUT YOUR PUMP?
Pool Heat Pump FAQs
Running cost depends on the unit's size and efficiency, your pool size, your set temperature, and how often you swim. As a rough guide, an appropriately sized heat pump on a covered residential pool typically costs $30 to $80 per week to maintain a comfortable swimming temperature in the swimming season, and more in winter.
Yes, and that's the main advantage over solar. Modern inverter pool heat pumps continue to extract heat from the ambient air down to around 5°C. Output drops as the air gets colder, but if sized correctly, they will keep a covered pool at swimming temperature through an Adelaide winter.
Initial heat-up depends on water volume, starting temperature, and heat pump output. As a guide, a 50kL pool with a 17kW heat pump and a thermal cover typically heats from ambient cold temperature to 28°C over 1 to 3 days. During that period the heat pump runs at full capacity. Once the pool is at temperature, it only runs to maintain the heat.
Beside your pool equipment pad, typically near the existing pool pump and filter. The unit needs clear airflow space and access to power. We will assess the location and have air discharge deflectors available if required.
Most of the larger units will. Smaller units run on standard single-phase 240V; larger units may need a dedicated circuit or three-phase supply. We'll confirm during the quote and coordinate with our in-house licensed electrician (or yours) on what's required.
Guardian heat pumps have a service life of up to 15 years if well-maintained. The main factors in longevity are routine servicing, water chemistry, and protection from coastal salt air on coastal installs.
Yes, and many of our customers do. Running a heat pump during daylight hours from your home's solar PV system can dramatically reduce or eliminate running costs.
%20Large.jpeg)
%20Large.jpeg)
WHY TRUST US FOR YOUR POOL HEAT PUMP
Why South Australians Choose Beasley for Heat Pumps
Not all heat pump installations are equal. From correct sizing and authorised Guardian products to in-house service, spare parts and electrical coordination, here’s what sets Beasley apart...
REAL HEAT PUMP PROJECTS
Pool Heat Pump Installs Across South Australia
See how we size and install pool heat pumps for different homes, pool sizes and heating goals across South Australia. Each system is selected around the pool, desired temperature and how the owners actually want to use it.
Guardian Lux-V GLV 32kW Heat Pump Installation
Adelaide Eastern Suburbs
A Guardian Lux-V GLV 32kW three-phase heat pump supplied for trade partner Pool and Property. Its compact top-discharge design delivers premium performance while minimising the space required, making it ideal for tight installations and reliable year-round pool heating.
Guardian Eco-Pro GE 35kW Heat Pump Installation
Adelaide Southern Suburbs
A Guardian Eco-Pro GE 35kW three-phase pool heat pump supplied, delivered and carefully positioned for a valued trade partner. The Beasley team pre-attached the fittings, installed the feet on-site and left the protective packaging in place until plumbing was ready. Built-in factory Wi-Fi also enables reliable remote monitoring and ongoing support.
Guardian GLV 28kW Titanium Inverter Heat Pump Upgrade
Regional SA
An outdated pool heat pump replaced with a compact Guardian GLV 28kW Titanium Inverter model, delivering an additional 9kW of heating power while occupying half the space. Factory-installed Wi-Fi enables convenient remote monitoring for efficient, reliable, year-round pool comfort.
HEAT PUMP REVIEWS
Adelaide Owners on Heating by Heat Pump
A heat pump gives you the water temperature you choose, whatever the weather is doing. Here is what owners make of it.
Keep Up the Great Work Guys
"Five stars for Henry and his team. They were great right from the process of provide quote (best price), site visit, equipment installation (modified their standard process to suit my property’s requirements at no extra cost) and, more importantly providing prompt after sales-service.
Everyone was punctual, respectful in behaviour and super helpful with general maintenance tips and advice. Keep up the great work guys."
Deesin10
Google Review
Prompt & Professional Approach
"All the guys from Beasley Solar were fantastic I had them do a full system for me back in 2003 and my controller packed up.
Called, spoke to Henry at the store and the very next day the guys arrived and replaced controller now all perfect again. Thank you guys for your prompt and professional approach.
Highly recommend them to anyone."
Mike Whellans
Google Review
Worked Without Fault
"Was doing an extension on my property at Unley and was in need of prompt service when building my pool and solar heating. John and his team were contacted, attend onsite and quoted and installed seamlessly and the system has worked without fault.
I have never had a problem in years and would highly recommend the business for anyone looking at solar or pool equipment in general as a first step."
Krystal Martinovic
Google Review
Quality Was Amazing
"These guys just installed a solar heating system at my home in Walkley Heights. The service was great, the installation quality was amazing and the system works like a charm.
If your going to get solar heating use this great south Australian business, we looked at most companies and DIY kits this
system is much much better then we could of thought.
Thanks again."
Mal Jones
Google Review
NOT READY TO COMMIT? EXPLORE MORE BELOW
Explore More Pool Heat Pump Options
Whether you want to compare Guardian models, understand the installation process, organise servicing or see how heat pumps stack up against solar, these pages will help you find the right next step for your pool...
WHERE WE WORK
Pool Heating Across Adelaide & South Australia
We install pool heating across the greater Adelaide metropolitan area, including the western suburbs (Henley Beach, Grange, West Lakes, Seaton), the eastern suburbs (Norwood, Burnside, Magill, Stonyfell), the southern suburbs (Brighton, Marion, Aldinga, Seaford), the northern suburbs (Mawson Lakes, Salisbury, Gawler, Munno Para), and the Adelaide Hills.
We also undertake commercial and larger residential installations regionally across South Australia, including the Barossa Valley, Fleurieu Peninsula, Yorke Peninsula, Limestone Coast and Riverland.
DIY kit orders can be shipped Australia-wide.
Pool Heating in Northern Adelaide
From Salisbury to Gawler, solar specialists for the growing north
From the established suburbs around Salisbury and Para Hills out to the fast-growing family estates of Gawler, Munno Para and Angle Vale, Beasley Pool Heating installs solar pool heating, heat pumps and DIY kits right across Adelaide's north.
The newer homes and larger blocks up this way are well suited to roof-mounted solar, and our team installs and services it all the way to the northern fringe.
Suburbs we cover include: Mawson Lakes, Salisbury, Salisbury East, Salisbury Heights, Para Hills, Pooraka, Ingle Farm, Walkley Heights, Gepps Cross, Elizabeth, Craigmore, Blakeview, Smithfield, Andrews Farm, Munno Para, Gawler, Angle Vale, Virginia and Two Wells.
Good to know: most metro installs in the north are completed in a single day, with service and spare parts run out of our Beverley warehouse.
EXPLORE THE BLOG
