HEAT PUMP INSTALLATION
Pool Heat Pump Installation in Adelaide: What’s Actually Involved
Pool heat pump installation by Beasley typically takes half a day for a standard metro Adelaide residential job, including plumbing, electrical coordination, controller setup and commissioning. Larger units, three-phase electrical work, or commercial installs are scoped individually.
As authorised Guardian dealers in South Australia and Northern Territory, our in-house team handles every install personally. We coordinate with licensed electricians where required, and strive to offer ongoing servicing callouts within 48 to 72 hours for the full life of the system.
WHO IT’S FOR
Who this page is for
This page covers exactly what’s involved in installing a pool heat pump, for buyers researching before they quote, customers about to install, or anyone curious about what the process looks like.
This page is most useful if you:
Are about to book a quote
Understand what we’ll be discussing before the conversation happens.
Are comparing installers
Understand our installation process and what’s included as standard, so you can compare like for like.
Have received a quote
See exactly what the install involves, step by step, before you commit.
Are coordinating other pool work
Understand timing so a heat pump install slots cleanly alongside other pool work.
What’s in the van?
Tools, spares and safety gear
Common spare parts (isolation valves, fittings, controllers), a full toolkit for plumbing, basic electrical and mechanical work, and safety equipment and protective gear.
WHAT’S INCLUDED
What’s included in a Beasley heat pump installation
Every Beasley heat pump installation includes the same complete scope, regardless of which Guardian range you choose.
Guardian heat pump unit
Plumbing connection
Electrical coordination
Controller setup and programming
Site preparation
Commissioning and walkthrough
INSTALL DAY
What happens on installation day
A standard metro residential heat pump install typically runs as a half-day visit. Here’s exactly what happens.
Arrival and site setup (30 minutes)
Our team arrives in a marked Beasley van. We confirm placement with you, set up tools, lay protective drop sheets if needed, and brief you on what to expect.
Unit positioning (30 minutes to 2 hours)
Heat pump positioned on the prepared pad, wall or roof mount. All necessary factors considered and accounted for: access, ground levelling, noise, air discharge clearances and direction.
Plumbing connection (1 to 2 hours)
Connection into your existing pool filtration system. Pool filtration is briefly interrupted but the pool isn’t drained.
Electrical work (1 hour)
A licensed electrician handles the electrical connection, coordinated as part of the install. Straightforward single-phase installs happen during the same visit; a new feed from the switchboard or more complex switchboard work may be a separate scheduled visit.
Commissioning, handover and cleanup (30 minutes)
We start the system, program the controller to target temperature, verify output, check for leaks and run an initial heating cycle. Site cleaned, packaging removed, final walk-through, operation manual handed over, and we’re done.
EXPLORE PRICING
What does installation cost?
Installation cost will be clearly labelled on your heat pump quote, no surprises and hidden costs. Here’s what drives the install cost specifically.
Site preparation requirements
Plumbing complexity
Electrical scope
Travel and access
Specific complexity
FAQS
Installation FAQs
No. Heat pump installation doesn’t require draining the pool. Pool circulation is briefly interrupted during plumbing connection, but the pool stays full.
Minimal. Most installs are completed in half a day with limited noise and no major disruption to your home or pool use. The only real impact is brief pool circulation interruption.
For commissioning and walkthrough, most owners want to be present so they understand how the system operates. However, as long as we have access, you do not need to be home for the install.
We assess switchboard capacity during the quote. If upgrade work is required, we coordinate it with a licensed electrician and include it in the fixed-price quote, no surprises.
Yes, we install heat pumps year-round. Winter can sometimes be preferred in preparation for the next swimming season.
Yes, most certainly. We offer supply only and can supply all necessary components required for your install. Give us a call to discuss the best way to connect your heat pump DIY. For most units, a licensed electrician is still required.
Most prep is on us, but a few things help: clear access to the install area, move anything fragile nearby, make sure your switchboard is accessible if electrical work is in scope, have your pool chemistry balanced before commissioning, flag any concerns (neighbour proximity, noise sensitivity, positioning preferences) before install day, and ideally be home for the commissioning walkthrough. If you can’t be, we’ll arrange a remote handover.
BEFORE WE ARRIVE
What you need to do before install day
Most prep is on us, but a few things help the install go smoothly.
Access and surroundings
Clear the way
Electrical and pool chemistry
Ready to commission
Concerns and commissioning
Flag it early
INSTALL REVIEWS
What Owners Say About the Day We Installed
Most heat pump installs are done in a day. Here is what customers say about the crew, the tidy-up and the first swim.
Keep Up the Great Work Guys
"Five stars for Henry and his team. They were great right from the process of provide quote (best price), site visit, equipment installation (modified their standard process to suit my property’s requirements at no extra cost) and, more importantly providing prompt after sales-service.
Everyone was punctual, respectful in behaviour and super helpful with general maintenance tips and advice. Keep up the great work guys."
Deesin10
Google Review
Prompt & Professional Approach
"All the guys from Beasley Solar were fantastic I had them do a full system for me back in 2003 and my controller packed up.
Called, spoke to Henry at the store and the very next day the guys arrived and replaced controller now all perfect again. Thank you guys for your prompt and professional approach.
Highly recommend them to anyone."
Mike Whellans
Google Review
Worked Without Fault
"Was doing an extension on my property at Unley and was in need of prompt service when building my pool and solar heating. John and his team were contacted, attend onsite and quoted and installed seamlessly and the system has worked without fault.
I have never had a problem in years and would highly recommend the business for anyone looking at solar or pool equipment in general as a first step."
Krystal Martinovic
Google Review
Quality Was Amazing
"These guys just installed a solar heating system at my home in Walkley Heights. The service was great, the installation quality was amazing and the system works like a charm.
If your going to get solar heating use this great south Australian business, we looked at most companies and DIY kits this
system is much much better then we could of thought.
Thanks again."
Mal Jones
Google Review
KEEP EXPLORING
Related pages you might find useful
More on the Guardian range and sizing the right unit.
SERVICE AREAS
Where we install pool heat pumps
Across the greater Adelaide metropolitan area (standard half-day install timing) and regional South Australia (timing scoped on travel logistics).
Pool Heating in Northern Adelaide
From Salisbury to Gawler, solar specialists for the growing north
From the established suburbs around Salisbury and Para Hills out to the fast-growing family estates of Gawler, Munno Para and Angle Vale, Beasley Pool Heating installs solar pool heating, heat pumps and DIY kits right across Adelaide's north.
The newer homes and larger blocks up this way are well suited to roof-mounted solar, and our team installs and services it all the way to the northern fringe.
Suburbs we cover include: Mawson Lakes, Salisbury, Salisbury East, Salisbury Heights, Para Hills, Pooraka, Ingle Farm, Walkley Heights, Gepps Cross, Elizabeth, Craigmore, Blakeview, Smithfield, Andrews Farm, Munno Para, Gawler, Angle Vale, Virginia and Two Wells.
Good to know: most metro installs in the north are completed in a single day, with service and spare parts run out of our Beverley warehouse.
EXPLORE THE BLOG
